Shop Kreidezeit Lime Paint

Finish & Colours Supplied naturally in white as Smooth or Textured. Tint with pigments to produce a wide range of colours. Please find our colour chart below. These colours are homemade shades and are not linked to any RAL or NCS numbers: Please click on the chart to view a larger image. * Please note the colours shown on the Paint Colour Chart online should be used as a guide only. We advise you request a physical colour chart from us or purchase 100 ml sample pots before committing to an order. Application Apply a base coat to all renders, fillers, levelled drywall, concrete and old emulsion paints with Vega Primer (internal applications only) or Casein Primer and leave to dry completely. Do not apply to paper fleece/wallpaper. Do not apply below 8°C. Stir the product thoroughly before use. Immediately remove paint splashes on adjacent components with water. For full opacity, apply at least 2 coats of paint – possibly 3 for very coarse substrates. Do not try to cover dark and high-contrast substrates with only one coat of paint; excessive application thicknesses can lead to damage to the paint! When wet, the paint is translucent and full coverage is achieved after drying. Stir up paint occasionally during application. We recommend application with a brush in a crisscross pattern. White lime paints can also be rolled on slightly absorbent surfaces. Work swiftly “wet-on-wet” in a crisscross pattern and then roll the surface in one direction. It’s not advisable to roll tinted Lime Paints. Coverage Lime Paint Smooth: approx. 0.15 l / m² Lime Paint Textured: approx. 0.20 l / m² Uses For use on interior surfaces including untreated mineral plasters, concrete, stone, masonry, plasterboard, gypsum fibre boards, paper fleece, all Kreidezeit wall paints and plasters (except distemper), matt and absorbent synthetic resin dispersion paints (after application of test surfaces with positive result). Kreidezeit Lime Paint can also be used on exterior surfaces such as untreated mineral, weather-resistant plasters, concrete, stone. Not suitable for application onto wood, wood-based materials, natural resin dispersion paints, oil paints, plastic surfaces, glue-bound distempers, glossy and non-absorbent paints, permanently moist substrates. Do not use on composite thermal insulation systems. The substrate must be absorbent, structurally sound, clean, dry, solid, non-greasy and free from colouring and permeating ingredients. Request Colour Chart  First Name *Last Name *Email Address *Phone NumberStreet Address *AddressCityPost CodeAdditional notes0 / 180Request Colour Chart